IFM Ecomat 300 AS-i Series, Basic Device Manual

Page: 103 / 280

ifm Basic Device Manual AS-i ControllerE M4 Target V15 2015-10-30
Menu Main menu [Diagnostics]
103
9.6 Main menu [Diagnostics]
Display of status information of the masters and reset of the error counters
Menu tree Description
Diagnostics
AS-i Master 1
Diagnostics
AS-i Master 1
Voltage Disturbance
Power failure:
→ page
191
> Display of the number of power failure incidents on the AS-i
bus.
Diagnostics
AS-i Master 1
Configuration Error
Configuration errors:
> Display of the number of found configuration errors since
the last reset
Diagnostics
AS-i Master 1
Telegram Error
Telegram errors:
→ page
195
> Display incorrect AS-i telegrams in per cent of the sent
telegrams.
► After [MORE]:
> Display of the number of active slaves
> Display of the number of AS-i cycles per second
NOTE
For the evaluation of the information please note: The controllere polls A/B slaves connected as pairs
(i.e. with the same address) only in every other cycle.
Diagnostics
AS-i Master 1
Noisy Slaves
Noisy Slaves:
→ page
198
> Display of the number of disturbed telegrams of every
active slave
► After [SORT]:
> New sorting of the table by the number of disturbed
telegrams.
Diagnostics
AS-i Master 1
Reset Error Counter
Reset of the error counter (password level 1 required):
→ page
200
► After [OK]:
> Set all error counters to 0.
Diagnostics
AS-i Master 1
Cycle time
Cycle time:
→ page
202
> Display of the longest cycle time of the system in [ms] since
the last reset.
► After [CLEAR]:
> Reset the previous measurement series and start a new
measurement series.
Diagnostics
AS-i Master 2
See AS-i master 1
Diagnostics
Safety Master 1
Diagnosis of safety monitor on master 1
Diagnostics
Safety Master 1
Read Monitor
Reading the status of the safety monitors
→ page
204
> Status information of OSSD (Output Signal Switching
Device)