ifm
Basic Device Manual AS-i ControllerE M4 Target V15
2015-10-30
Safety instructions
General
12
2
Safety instructions
In this chapter you will find general safety instructions such as:
General rules
Safety instructions for mounting and installation
When are you allowed to use this device and when not?
2.1
General
No characteristics are warranted with the information, notes and examples provided in this manual.
The drawings, representations and examples imply no responsibility for the system and no application-
specific particularities.
The manufacturer of the machine/equipment is responsible for ensuring the safety of the
machine/equipment.
WARNING
Property damage or bodily injury possible when the notes in this manual are not adhered to!
ifm electronic
assumes no liability for this.
► The acting person must have read and understood the safety instructions and the corresponding
chapters of this manual before performing any work on or with this device.
► The acting person must be authorised to work on the machine/equipment.
2.2
What previous knowledge is required?
This manual is intended for persons with knowledge of control technology and PLC programming with
IEC 61131-3 as well as the CoDeSys
®
software.
The manual is intended for persons authorised to install, connect and set up the controllere according
to the EMC and low voltage directives. The controllers must be installed and put into operation by a
qualified electrician.
In case of malfunctions or uncertainties please contact the manufacturer:
→ back of the manual
