iET PRS-330 series, Operation Manual, Page: 61 / 67

PRS-330 Series
APPENDIX B
49
COMMON Commands:
*IDN? Returns instrument identi fi cation “IET Labs Inc.,PRS-330,<Serial
number>,<software version>”
Serial number in the form “Ax-xxxxxxxx” x = 0 to 9. A = Alpha can be A to Z.
*TST? Self-Test Returns ASCII 0 or 1, 0 = bad or 1 = good
*RST Returns PRS-330 to default “power on” condition
*SAV <number> Saves current resistance value into memory location 0 to 9
Number is 0 to 9
*RCL< number> Recalls resistance value from memory location 0 to 9
Number is 0 to 9
SYSTEM Commands
SYSTem:SERIal <Ax-xxxxxxxx> Sets the serial number in non-volatile memory < serial num-
ber>
Serial number in the form “Ax-xxxxxxxx” x = 0 to 9. A = Alpha can be A to Z.
SYSTem:SERIal? Returns Serial number
SYSTem:CONTrast <number> Sets system contrast speci fi c number from 0 to 15
SYSTem:KEY <number> Same as pressing key on front panel of PRS-330
<Number> is 0 to 24
keys 0-9
0 – 9
OPEN 14
MENU 15
TABLE 16
Decimal Point 21
BACK 23
ENTER 24
Short 17
Open 18
SYSTem:LOCal: This command places device in the LOCAL mode and unlocks all keys
Appendix B
PRS-330 COMMON COMMANDS