iET PRS-330 series, Operation Manual, Page: 43 / 67

PRS-330 Series
ETHERNET INTERFACE OPTION
31
The Digital I/O con fi guration values are not
affected by the LAN Reset operation.
Command Function Factory Setting
IP Mode Static or DHCP
Mode Static
IP Address 0.0.0.0 to
255.255.255.255.0 192.168.0.2
Net Mask 0.0.0.0 to
255.255.255.255.0 255.255.255.0
COMM Timeout Sets socket timeout 120 sec.
Auto Disconnect Aborts socket if link
count goes to 0 Off
Table 4-2 Default Settings
5.8 PRS Programming
A PRS SCPI command reference is in-
cluded in Appendix A. This gives a complete
set of commands.
An example of commands to be sent to
place the PRS in remote, this must be done
fi rst otherwise the will be no remote control of
output impedance, and then con fi gure the unit
for a speci fi c impedance value.
Where the command string is constructed
as described in Appendix A and Appendix B.
A command string might be, for example:
SOURce:DATA 1000000.1