iET PRS-330 series, Operation Manual, Page: 31 / 67

PRS-330 Series
OPERATION 19
Once the table is selected the home screen will
change for example to temperature on the display
see Figure 3-6.
Figure 3-6 PT-100 °C set to 100 °C
3.4.6.1 User Select RTD Menu
Custom tables and other RTD tables can be
con
fi gured by highlighting User Select RTD and
pressing ENTER .
The User Functions menu will be shown which
allows the user to add tables and specify a name
for the table. See Figure 3-7
Figure 3-7 User Functions Menu
Highlight User Functions: Default and pressing
ENTER opens the Select Name menu.
Select DEFAULT From this menu you can press
ADD or DEL to add or delete additional table
names. See Figure 3-8.
Figure 3-8 Select Table Name
Pressing ADD key opens an entry screen so that
a name of the table can be entered.
If there are tables which need to be deleted then
highlight the table and press
DEL .
Once the table name is entered, the table can be
selected in
User Functions: and then a value of
Units of Ω , F, C or K can be entered.
Use the key to move UP and the to move
DOWN between
User Functions :, Units: and
the Table .
The table shown in the bottom of Figure 3-7
can then be
fi lled out highlighting the Table and
pressing ENTER . This will allow you to ADD
or EDIT the table.
When ADD is selected fi rst enter the Value for
the RTD, press ENTER and a prompt will be
displayed for the desired resistance in Ω s. This
can be done for as many points as required. The
procedure within the
fi rmware will do linear
interpolation in between points so not all possible
values need to be entered into the table.
3.4.7 Remote Communications Settings Menu
Highlight remote settings and press ENTER key
to access remote settings. See Figure 3-8