iET PRS-330 series, Operation Manual, Page: 57 / 67

PRS-DMM SOFTWARE
PRS-330 Series
45
will be shown in the white box along with a
Success indication.
Click Exit key to return to Setting Screen once
PRS has been detected.
Figure 9.3 PRS Settings Screen
9.3.3 Meter Settings
Meter Setting screen allows the operator to select
which DMM will be used either the Fluke 8508A
or the Keysight 3458A. The GPIB address of the
DMM can also be set in this menu. Make sure
the DMM is turned on and connected to the PC.
Figure 9.4 Meter Screen
Select the GPIB address and then click the
Initialize key. The IDN string will be shown in
the white box along with a Success indication.
The PRS-DMM software will configure the
DMM for resistance measurements, appropriate
resolution 7 ½ digits for slow, 6 ½ digits for
medium and fast, 4 wire measurements and
autorange ON.
The 8508A will also be configured for Low
Current, Fast AD Integration OFF, and Analog
Filter OFF.
If additional commands need to be sent to the
DMM, click on the Con
fi gure Key and enter the
commands in the text box.
Once the commands have been entered press the
Con
fi gure key. Any commands will be send to
the DMM during initialization of the DMM.
Figure 9.5 Meter Con fi gure Screen
Click Exit key to return to Setting Screen once
DMM has been detected.