IDTECK Star 100R, User Manual

Page: 8 / 40

8
OPTIONAL: Wiegand Output Function
Applicable to: v5.2.0 of the 100R
v2.2.0 of the IP100R
You can configure the 100R to generate output in Wiegand format and use it like a reader.
(The 100R can output data from card reading, but doesn’t output data from keypad input.)
9 JP9, JP10 : Short PIN1 and PIN2 --> Wiegand Output
9
JP9, JP10 : Short PIN2 and PIN3 --> Default(TTL Output, Chime Bell Output)
In order to configure the 100R to output in Wiegand format, you need to set the jumpers as shown
above.
Changes when Wiegand Output Mode is applied;
TTL Output(Orange wire with White stripe) -> Wiegand Data0 Output
Chime Bell Output(Brown wire with White stripe) -> Wiegand Data1 Output
When the Wiegand Output function is used, TTL Output wire and Chime Bell Output wire are
changed to Wiegand Data 0 Output wire and Wiegand Data 1 Output wire and, therefore, you
can’t use those functions. In addition, because TTL Output wire is changed to Wiegand Data
0 Output, you can’t initialize the 100R using the wires.
(You can use those functions again by setting JP9 and JP10 back to the default state.)