25
13
.
Initialization
When you lost the Configuration Card or forgot the Master PIN number, you may need to
re-initialize the unit for new setup. There is a hard-wired Initialize function on the unit.
※
WARNING: You may lose all setup data after execute Initialize.
13-1. Hardware Initialization (When the master card or ID is lost)
13-2. Wire Initialization
(When the master card or ID is lost, 100R: Over V5.0.0 / IP100R: Over V2.0.0)
1) Open the top case taking out four bolts on the back.
2) As the left picture, make two jumpers short in state of being
on power
3) 3-color LED blinking with beep sound indicates success of
initialization
1) Main power off.
2) Connect the orange and orange with white stripe wire together and power on.
3) 3
color LED blinking with beep sound indicates the success of initialization.
100R: V5.0.0 ~ V5.0.3 / IP100R: V2.0.0 ~ V2.0.1
4) Main power off again.
5) Disconnect orange wire and orange with white stripe wire as shown above
(normal connection diagram) and power on.
100R: Over V5.0.4 / IP100R: Over V2.0.2
4) Disconnect those two wires and wire them as shown above(normal connection diagram).
Summary of Contents for Star 100R
Page 1: ...User s Manual...
Page 39: ...39 17 Template...
