IDTECK Star 100R, User Manual

Page: 32 / 40

32
● Solution
▶
Check if any buzzer goes off when the keypad is pressed.
☞
If the buzzer goes off:
1. Enter the master card (or PIN: 4 to 6digit (mode 03 or 05) + ENT).
2. Enter “73 + ENT” to “Enable Keypad Input To Enter ID Number”.
☞
If the buzzer does not go off:
1. After going on definite time, buzzer makes a sound again.
a. If entering unregistered ID 5 times continuously, entering a keypad is interrupted
for 1 min.
b. “Set Number of Times of Try-Out” is below.
- Enter the master card (or PIN: 4 to 6digit (mode 03 or 05) + ENT).
- Enter “82 + ENT” to “Set Number of Times of Try-Out”.
- Enter “2 digit of Try-Out Times + ENT”.
e.g. 10 + ENT (10 Î Set number of try-out times when unregistered ID)
c. “Change Keypad Lock-out Time When Try-Out Error Detected” is below.
-
Enter the master card (or PIN: 4 to 6digit (mode 03 or 05) + ENT).
-
Enter “60 + ENT” to “Change”.
- Enter “2 digit of Try-Out Times + ENT”.
e.g. 10 + ENT (10
Î
Interrupt entering a keypad for 10 min.)
2.
Although it goes on definite time, buzzer doesn’t go off continuously.
Initialize the product
#1)
.
● If the problem still persists, contact our customer service center.
[External Device]
● Problem
An exit button will not work.
● Cause
▶
An error in connection between the exit button and the 100R
▶
An exit button error
▶
Internal circuit element damaged or malfunctioning
● Solution
▶
Make sure of connection between the exit button and the 100R and of operation of exit
button.
☞
Check the connection between the exit button and the 100R.
#1)
System Initialization: See page 24 of this Manual.
#2)
Initial Setting: See page 10 of this Manual.
#3)
Setting Change: See page 14 of this Manual.
Upon initialization, all data default value will be restored.
Caution
See “Setting Changes
#4)
” to “Enable / Disable Keypad Input To
Enter ID Number”.
Caution
See “Setting Changes
#4)
” to “Set Number of Try-Out”. Caution