IDTECK Star 100R, User Manual

Page: 22 / 40

22
12-60. Change Keypad Lock-out Time When Try-Out Error Detected
(
mm
=00~99 min., Defaulted Keypad Lock-out time= 01 min.)
Configuration Card Command Keypad Lock-out time
/Configuration PIN
12-61. Set AUX Input #1 Detection from ‘L’ to ‘H’
AUX#1 input is detected on the raising edge of AUX#1 input
Configuration Card
/Configuration PIN
12-62. Set AUX Input #1 Detection from ‘H’ to ‘L’
AUX#1 input is detected on the falling edge of AUX#1 input
(Defaulted setting)
Configuration Card
/Configuration PIN
12-63. Set AUX#2 Input Detection from ‘L’ to ‘H’
AUX#2 input is detected on the raising edge of AUX#2 input
Configuration Card
/Configuration PIN
12-64. Set AUX#2 Input Detection from ‘H’ to ‘L’
AUX#2 input is detected on the falling edge of AUX#2 input
(Defaulted setting)
Configuration Card
/Configuration PIN
12-65. Set AUX#3 Input Detection from ‘L’ to ‘H’
AUX#3 input is detected on the raising edge of AUX#3 input
Configuration Card
/Configuration PIN
12-66. Set AUX#3 Input Detection from ‘H’ to ‘L’
AUX#3 input is detected on the falling edge of AUX#3 input
(Defaulted setting)
Configuration Card
/Configuration PIN
12-67. Set Exit Button Input Detection from ‘L’ to ‘H’
Exit Button input is detected on the raising edge of Exit Button input
Configuration Card
/Configuration PIN
12-68. Set Exit Button Input Detection from ‘H’ to ‘L’
Exit Button input is detected on the falling edge of Exit Button input
(Defaulted setting)
Configuration Card
/Configuration PIN