IDTECK Star 100R, User Manual

Page: 18 / 40

18
<TABLE 1> SETTINGS FOR COMMAND
12-21. Change Door Open Time When User Access Card (or PIN) Is Granted
(
tt
=00~99 sec., Defaulted Door Open time = 03 sec.)
Configuration Card Command Door open time TTL time
/Configuration PIN
12-22. Change Alarm Time When User Access Card (or PIN) Is Denied
(Refer to Table 1 for OM,
tt
=00~99 sec., Defaulted Alarm time = 02 sec.)
Configuration Card Command Output Mode Door time Alarm Time TTL time
/Configuration PIN
Symbol Setting Values Examples/Remarks
Output
Mode
(OM)
(You must add value
①
and
②
)
Setting value for activating time
①
Activate Mode Value
Activate only in Secure Mode : 00
Activate in Safe & Secure Mode : 50
Setting Value for activating Output Port
②
Activate Output Port Value
Activate only Door Relay : 01
Activate only Alarm Relay : 02
Activate only TTL Output : 04
Activate Door Relay & TTL : 05
Activate Alarm Relay & TTL : 06
EX1)Activate Door Relay
In Safe & Secure Mode
①
Safe & Secure Mode 50
②
Door Relay 01
OM = 51
EX2)Activate Alarm Relay
& TTL only in Secure mode
①
Secure Mode 00
②
Alarm Relay & TTL 06
OM = 06
tt
tt
is the activating time value (seconds)
from 01sec. to 99sec.
tt
value 00sec. means
no operation.
PW
PW is the 2 digits Password for
Duress Alarm. Do not use ‘77’ for PW as it is
used for Secure Mode
mm
mm
is activating time value (minutes)
from 01min. to 99min.
mm
value 00min. means
no operation.