23
12-69. Set Door Contact Sensor Input Detection from ‘L’ to ‘H’
Door Contact input is detected on the raising edge of Door Contact input
Configuration Card
/Configuration PIN
12-70. Set Door Contact Sensor Input Detection from ‘H’ to ‘L’
Door Contact input is detected on the falling edge of Door Contact input
(Defaulted setting)
Configuration Card
/Configuration PIN
12-71. Activate TTL Output to ‘H’
TTL output changes the state from logic '0' to logic '1' when it activates.
Configuration Card
/Configuration PIN
12-72. Activate TTL Output to ‘L’
TTL output changes the state from logic '1' to logic '0' when it activates.
(Defaulted setting)
Configuration Card
/Configuration PIN
12-73. Enable Keypad Input To Enter ID Number
Keypad input is enabled to enter the ID numbers through keypads.
Configuration Card
/Configuration PIN
12-74. Disable Keypad Input To Enter ID Number
Keypad input is disabled to enter the ID numbers through keypads.
(Defaulted setting)
Configuration Card
/Configuration PIN
12-77. Enable Chime Bell Output
Configuration Card
/Configuration PIN
(Defaulted setting=Enable)
12-78. Disable Chime Bell Output
Configuration Card
/Configuration PIN
12-80. Set Delay Time to Activate SECURE MODE
(mm=00~99
min.,
Defaulted Delay time= 00 min.)
Configuration Card Command
Delay time
/Configuration PIN]
Summary of Contents for Star 100R
Page 1: ...User s Manual...
Page 39: ...39 17 Template...
