22
Harrier GT Range
- Installation
3
ASSEMBLY
5
- Put two wooden chocks of 170 mm in height into position.
- Move the first intermediary section so that it is facing the
rear section, make sure to place it in the correct way ie.
the sealing groove against the thermocord. Drive in the
two nipples lightly and af the same time using a hammer
and a piece of wood, checking that thig nipples are
aligned with the bore before tightening.
- Drive in the nipples slightly using a piece
of wood A to avoid damaging them.
4
- Put the silicone thermocord into place in the rear section using a few
spots of silicone sealant.
Respect the junction point indicated in the drawing.
8219-EN-30
8219-EN-31 C
8219-EN-30 A
