Harrier GT Range
- Installation
25
ASSEMBLY
11
12
- Fit the door guide flap A on the opposite side to the hinge
using 2 H12 nuts + DE12 lockwashers.
- Fasten the burner door B with 4 H12 nuts and CL 14
washers.
- Fix the hinge C of the sweeping door at the right or left
hand side on the 2 lower pins using 2 H 12 nuts and
washers - 19 mm spanner.
- Put the sweeping door into place along with its pin D.
8219-EN-60
8219-EN-40 B
- If the orifice on the burner door needs to be enlarged,
proceed as per the drawing.
- Remove the first segment with a chisel.
- and the other segments with an adjustable spanner.
- Adjust the thermal insulation of the burner door according
to the burner.
