24
Harrier GT Range
- Installation
ASSEMBLY
9
10
BP 13, BP 14 or BP 26
- Using the pipe wrench, fit the studs A and B to the front
face (19 mm spanner). The shorter thread is to be screwed
into the section.
- Attach the hinge C of the burner door on the right or left
with 2 H12 nuts and 2 DE 12 lockwashers (19 mm
spanner) on the 2 lower studs.
- Put the burner door into place with its pin D.
- Using the pipe wrench, fit the 4 M8 studs and
the 8 M10 studs for the flanges (the shorter
thread is to be screwed into the section).
- Attach the outlet and return flanges using 4 H10
nuts for each flange (17 mm spanner) and place
a sealing gasket in between each time. For the
GT 8/9, the return flange is replaced by a flange
with water balancing tube.
- Fit the flue outlet onto the complete heating
body (4 H8 collar nuts - 13 mm spanner).
8219-EN-37
8219-EN-39 B
A = M 12 x 50
B = M 12 x 80
