28
Harrier GT Range
- Installation
ASSEMBLY
15
To be cut out for GT 5-6
- Place the two Cordostraps on the ground underneath the
boiler.
- Put the body insulation into position from the left -glass
wool to the outside- (in two parts from GT 8 onwards).
See drawing.
8219-EN-43
16
- Encircle the insulation with the 2 Cordostraps and
buckles and tighten.
- Attach the clips to hold it all in place.
- Fit the rear insulation and hold it in place using clips as
per the diagram.
8219-EN-44
17
- Place the two upper transversal parts into position with 2
M12 x 40 bolts, 2 H12 nuts and 2 dia. 12 mm
lockwashers, and the lower brackets with 4 M8 x 12
bolts and 4 DE8 lockwashers - 13 mm spanner.
8219-EN-45 A
