Harrier GT Range
- Installation
29
ASSEMBLY
18
19
- Put the upper rear panel into position (6 clips).
- Put the lower rear panel into position (4 self tapping screws dia. 3.9 x 12.7 + DE4 lockwashers - cross head screwdriver).
8219-EN-47
8219-EN-54 A
- Hook the side panels onto the transversal parts. Ensure
that the insulation slides behind this protection.
- Screw the side panels onto the transversal parts (2 A45
2 DE5 washers - 8 mm spanner).
- Slide the wiring duct between the transversal parts and fit
the rubberproffle strip.
- Fit the wiring duct end cap on the front transversal part
using 2 screws dia. 3.94 x 12.7.
