- 11 -
NOTE:
Do not stand under the unit when lifting.
Add fabric between the unit and the cable to prevent damage to the unit.
2.2 UNPACKING
Try to move the heat pump to the nearest place to the installation site, and then remove the packaging.
Unpacking steps:
1. Remove the side and top panels of cardboard.
2. Remove the packaging.
3. Remove the wood pallet.
2.3 INSPECTION
When receiving the goods of the company, please check that the delivery is complete and undamaged,
and whether the quantity of accessories are correct and all of the accessories are undamaged. If any
parts are missing or damaged during the inspection, please report to the carrier immediately. And if you
find hidden damage, please report it to the local office of the carrier and product supplier.
2.4 SAFETY RULES
In order to achieve the design performance of the unit and maximize its service life, please strictly follow
the installation instructions. This section should be applied in conjunction with current unit and electrical
installation regulations.
The unit is installed in an integrated floor plan, please install it outdoors or on the roof of the building.
Before installing the equipment, confirm that the installation environment meets the requirements (as
showed 1.8.2). And confirm the whether the building should be modified to match the construction of the
pipeline, wiring and the ventilation ducts.
The installation must strictly follow the design drawings and reserve maintenance space. Refer to the
engineering dimensional drawings provided by the manufacturer.
2.5 SAFETY PRECAUTIONS
● Please entrust professionals with professional knowledge to install. If it is installed incorrectly, it may
cause fire, electric shock, injury, water leakage, etc.
● According to the law, reliable grounding work must be carried out. If the grounding work is not
inadequate, it may cause electric shock.
● Do not put fingers, sticks, etc. into the motor fan. High-speed operation of the internal fan of the unit may result
in damage to the unit or personal injury.
● When there is abnormality (such as burnt smell), should immediately turn off the manual power switch, stop
the operation, and contact with the dealer. If continue to operate, it may cause electric shock or fire.
● When the unit needs to be moved or reinstalled, please ask professionals to operate. If the installation is not
perfect, it may cause electric shock, fire, injury, water leakage, etc.
● DO NOT modify or repair the unit by user, otherwise it may cause electric shock or fire.
● When need repair the unit, please entrust professionals. if repaired improperly, it may cause fire, electric shock,
injury, water leakage, etc.
Summary of Contents for ISW-10 SF1-DN1
Page 21: ... 21 XD 05BSPM ...
Page 56: ... 56 By sliding the button you can adjust the setting parameters Function buttons ...
Page 65: ......
