ECAT-2011H EtherCAT Slave I/O module
Copyright © 2018 ICP DAS CO., Ltd. All Rights Reserved.
-
24 -
4.
Object Description and Parameterization
The CoE interface is used for parameter management of EtherCAT devices. The display matches
that of the CoE objects from the XML device description
(ICPDAS ECAT-2011.xml
). Once the
ECAT-2011H connected to EtherCAT Master, you can configure the parameters via
“CoE – Online”
tab (double-click on the respective object). In general, the changes to the online CoE directory are
immediately effective.
Figure 4-1.1
