ECAT-2011H EtherCAT Slave I/O module
Copyright © 2018 ICP DAS CO., Ltd. All Rights Reserved.
-
14 -
Step 2
Verify that the LEDs indicators on the ECAT-2011H module are
illuminated as illustrated below:
Once the power is connected, the
“PWR”
LED should be illuminated in red.
Once the Ethernet link is detected, the
“IN”
LED should be flash in green.
Once the ECAT-2011H connected to EtherCAT Master, the
“RUN”
LED should be illuminated in
red.
Red, OK
Green, OK
RUN
Figure 3-1.2
