![background image](http://html.mh-extra.com/html/icom/ic-7700/ic-7700_instruction-manual_612325169.webp)
12-7
12
SET MODE
■
ACC set mode
ACC AF Output Level
50%
Sets the desired audio output level, output from
[ACC1], within 0 to 100% in 1% steps.
• Outputs approximately 200 mV at 50% (default) setting.
S/PDIF Output Level
100%
Sets the desired output level of [S/P DIF], within 0 to
100% in 1% steps. (default: 100%)
ACC MOD Level
50%
Sets the desired audio input level for modulation
from [ACC1].
• Approximately 100 mV at 50% (default) setting.
S/PDIF MOD Level
50%
Sets the desired input level for modulation from [S/P
DIF], within 0 to 100% in 1% steps.
(default: 50%)
LAN MOD Level
50%
Sets the desired input level for modulation from
[LAN], within 0 to 100% in 1% steps.
(default: 50%)
DATA OFF MOD
MIC,ACC
Selects the desired connector(s) for modulation
input when data mode is not in use.
• MIC
: Use the signals from [MIC].
• ACC
: Use the signals from [ACC1] (pin 4).
• MIC,ACC : Use the signals from [MIC] and
[ACC1] (pin 4). (default)
• S/P DIF
: Use the signals from [S/P DIF].
• LAN
: Use the signals from [LAN].
DATA1 MOD
ACC
Selects the desired connector(s) for modulation
input when data 1 mode (D1) is in use.
• MIC
: Use the signals from [MIC].
• ACC
: Use the signals from [ACC1] (pin 4).
(default)
• MIC,ACC : Use the signals from [MIC] and
[ACC1] (pin 4).
• S/P DIF
: Use the signals from [S/P DIF].
• LAN
: Use the signals from [LAN].