![background image](http://html.mh-extra.com/html/icom/ic-7700/ic-7700_instruction-manual_612325054.webp)
4-2
■
Operating SSB
q
Push a band key to select the desired band.
w
Push
SSB
to select LSB or USB.
• “USB” or “LSB” appears.
• Below 10 MHz LSB is automatically selected; above 10
MHz USB is automatically selected.
e
Rotate the main dial to tune a desired signal.
• The S-meter indicates received signal strength when a
signal is received.
r
Rotate [AF] to set audio to a comfortable listening
level.
t
Push
TRANSMIT
or [PTT] (microphone) to transmit.
• [TX] indicator lights red.
y
Speak into the microphone at your normal voice
level.
• Adjust the microphone gain with [MIC] at this step, if
necessary.
u
Push
TRANSMIT
or release [PTT] (microphone) to
return to receive.
4
RECEIVE AND TRANSMIT
• Preamp
(p. 5-10)
➥
Push [P.AMP]
(MF3)
several times to set the
preamp OFF, preamp 1 ON or preamp 2 ON.
• Hold down [P.AMP] (MF3)
for 1 second to turn the
preamp function OFF.
• “P.AMP1” or “P.AMP2” appears when the preamp 1
or preamp 2 is ON, respectively.
• Attenuator
(p. 5-10)
➥
Push [ATT]
(MF4)
several times to set the attenu-
ator in 6 dB steps.
• Hold down [ATT] (MF4)
for 1 second to turn the
attenuator function OFF.
• “ATT” and attenuation level appear when the attenu
-
ator is ON.
• Noise blanker
(p. 5-17)
➥
Push
NB
to turn the noise blanker ON or
OFF, and then rotate [NB] control to adjust the
threshold level.
• Noise blanker indicator (above
NB
switch) lights
when the noise blanker is ON.
• Hold down
NB
for 1 second to enter noise blank-
er set mode.
• Twin PBT (passband tuning)
(p. 5-13)
➥
Rotate [TWIN PBT] controls (inner/outer).
• PBT indicator (above
PBT-CLR
switch) lights when
PBT is in use.
• Hold down
PBT-CLR
for 1 second to clear the set-
tings.
• Audio tone control
(p. 12-4)
➥
Push [SET]
F-7
then [LEVEL]
F-1
to enter
level set mode. Select an item with [
Y
]
F-1
/
[
Z
]
F-2
then rotate the main dial to adjust the
audio tone.
• Noise reduction
(p. 5-18)
➥
Push
NR
to turn the noise reduction ON or
OFF.
• Rotate [NR] control to adjust the noise reduction
level.
• Noise reduction indicator (above
NR
switch) lights
when the noise reduction is ON.
• Notch filter
(p. 5-19)
➥
Push
NOTCH
to turn the auto or manual notch
function ON or OFF.
• Rotate [NOTCH] control to set the “valley” frequency
for manual notch operation.
• Notch indicator (above
NOTCH
switch) lights when
either the auto or manual notch is ON.
• AGC (auto gain control)
(p. 5-12)
➥
Push [AGC]
(MF5)
switch several times to select
AGC FAST, AGC MID or AGC SLOW.
➥
Push
AGC VR
to turn the AGC time constant
manual setting ON or OFF.
• Rotate [AGC] control to adjust the time constant.
• VSC (voice squelch control)
(p. 9-3)
➥
Push [VSC]
(MF7)
to turn the VSC function ON
or OFF.
• The VSC indicator appears when the voice squelch
function is set to ON.
D
Convenient functions for receive
[MIC]
[TX] indicator [RX] indicator
[AF]
Main dial
Band keys
SSB
TRANSMIT
Appears