![background image](http://html.mh-extra.com/html/icom/ic-7700/ic-7700_instruction-manual_612325062.webp)
4-10
D
Contest number set mode
This menu is used to set the contest (serial) number
and count-up trigger, etc.
• Setting contents
q
During CW mode operation, push [KEYER]
F-3
to select memory keyer screen.
w
Push
EXIT/SET
to select memory keyer menu, then
push [001]
F-3
to select contest serial number
set mode.
e
Push [
Y
]
F-1
or [
Z
]
F-2
to select the desired
set item.
r
Set the desired condition using the main dial.
• Hold down [DEF]
F-4
for 1 second to select the de-
fault condition or value.
• Contest number set mode screen
t
Push
EXIT/SET
twice to normal screen.
Main dial
F-1
∫
F-2
√
EXIT/SET
F-4
DEF
4
RECEIVE AND TRANSMIT
Number Style
Normal
This item sets the numbering system used for con-
test (serial) numbers— normal or short morse num-
bers.
Short morse numbers are also referred to as “cut”
numbers.
• Normal : Does not use short morse numbers
(default)
• 190
➔
ANO
: Sets 1 as A, 9 as N and 0 as O.
• 190
➔
ANT
: Sets 1 as A, 9 as N and 0 as T.
•
90
➔
NO
: Sets 9 as N and 0 as O.
•
90
➔
NT
: Sets 9 as N and 0 as T.
Count Up Trigger
M2
This selects which of the four memories will contain
the contest serial number exchange. The count-up
trigger allows the serial number to automatically
increment after each complete serial number ex
-
change is sent.
• M1, M2, M3 and M4 can be set. (default: M2)
Present Number
001
This item shows the current number for the count-up
trigger channel set above.
• Rotate the main dial to change the number, or hold
down [001CLR]
F-4
for 1 second to reset the cur-
rent number to 001.