![background image](http://html.mh-extra.com/html/icom/ic-7700/ic-7700_instruction-manual_612325025.webp)
1-15
1
PANEL DESCRIPTION
i
APF/TPF INDICATOR
➥
“
APF
” appears when the audio peak filter func-
tion is in use. This function is available in CW
mode. (p. 4-6)
➥
“
TPF
” appears when the twin peak filter func-
tion is in use. This function is available in RTTY
mode. (p. 4-14)
o
CLOCK READOUT
Shows the current time. Local and UTC time can
be indicated at the same time.
!0
USB-MEMORY INDICATOR
Appears when USB flash drive is connected and
blinks while reading or writing the USB flash drive.
!1
RIT INDICATOR
Appears when RIT function is in use.
!2
∂
TX INDICATOR
Appears when
∂
TX function is in use.
!3
LAN INDICATOR
Appears when the Remote station access the trans-
ceiver through the LAN. (An optional RS-BA1 is re-
quired.)
!4
RIT/
∂
TX SHIFT FREQUENCY INDICATOR
Shows the shift frequency for the RIT or
∂
TX func-
tion.
!5
IF FILTER INDICATOR
(p. 5-14)
Shows the selected IF filter number.
!6
QUICK TUNING INDICATOR
(p. 3-6)
Appears when the quick tuning step function is in
use.
!7
FREQUENCY READOUTS
Shows the operating frequency.
!8
MULTI-FUNCTION SCREEN
Shows the screens for the multi-function digital
meter, spectrum scope, voice recorder, memory
list, scan, memory keyer, RTTY decoder, PSK de-
coder, IF filter selection or set modes, etc.
!9
LCD FUNCTION SWITCH GUIDE
Indicates the function of the LCD function switches
(
F-1
–
F-7
).
@0
MEMORY CHANNEL READOUTS
➥
Shows the selected memory channel contents
in VFO mode.
➥
Shows the VFO contents in memory mode.
@1
MULTI-FUNCTION SWITCH GUIDE
Indicates the function of the multi-function
switches.
@2
SELECT MEMORY CHANNEL INDICATOR
(p. 9-7)
Indicates the displayed memory channel is set as
a select memory channel.
@3
SELECT ANTENNA INDICATOR
Indicates the selected antenna.
@4
TX INDICATOR
➥
“
TX
” appears while transmitting.
➥
Indicates the frequency readout for transmit.
• Appears on the sub readout when the split function
is turned ON.
• A TX indicator with doted rectangle, “
TX
” is dis-
played, instead of the regular “
TX
” TX indicator,
when a frequency outside of an amateur band
frequency range is selected. This function can be
turned OFF in set mode, if desired. (pp. 3-13, 12-12)
@4
VFO/MEMORY CHANNEL INDICATOR
(p. 3-3)
Indicates the VFO mode or selected memory chan
-
nel number.
@5
MODE INDICATOR
Shows the selected mode.