![background image](http://html.mh-extra.com/html/icom/ic-7700/ic-7700_instruction-manual_612325195.webp)
13-3
D
Scanning
D
Display
D
Format USB flash drive
13
MAINTENANCE
PROBLEM
POSSIBLE CAUSE
SOLUTION
REF.
Programmed scan does
not stop.
Programmed scan does
not start.
Memory scan does not
start
Select memory scan does
not start
• Squelch is open.
•
The same frequencies have been programmed
in scan edge memory channels P1 and P2.
• 2 or more memory channels have not been
programmed.
• 2 or more memory channels have not been
designated as select channels.
• Set [SQL] to the threshold point.
• Program different frequencies in scan edge
memory channel P1 and P2.
• Program more than 2 memory channels.
• Designate more than 2 memory channels as
select channels for the scan.
p. 3-9
p. 8-3
p. 8-3
p. 9-7
PROBLEM
POSSIBLE CAUSE
SOLUTION
REF.
The displayed frequency
does not change properly.
• The dial lock function is activated.
• A set mode screen is selected.
• The internal CPU has malfunctioned.
•
Push [LOCK] to turn the function OFF.
• Push [EXIT/SET] several times to exit the set
mode screen.
• Reset the CPU.
p. 5-18
p. 12-2
p. 13-7
■
Main dial brake adjustment
The tension of the main dial may be adjusted to suit
your preference.
The brake adjustment is located on the bottom side of
the front panel. See the figure at left.
Slide the brake adjustment to a comfortable tension
level while turning the dial continuously and evenly in
one direction.
Light
Heavy
[MAIN DIAL]
Brake
adjustment
PROBLEM
POSSIBLE CAUSE
SOLUTION
REF.
Format error appears
when formatting in FAT32
Format error appears
when formatting in FAT
• The inserted USB flash drive capacity is
smaller than 64 MB.
• The inserted USB flash drive capacity is
larger than 2 GB.
•
Insert a USB flash drive larger than 64 MB or
select the FAT format.
•
Insert a USB flash drive smaller than 2 GB or
select the FAT32 format.
p. 12-30
p. 12-30