![background image](http://html.mh-extra.com/html/icom/ic-7700/ic-7700_instruction-manual_612325114.webp)
6-4
■
∂
TX function
The
∂
TX function shifts the transmit frequency up to
±9.999 kHz in 1 Hz steps (10 Hz steps when cancel-
ling the 1 Hz step readout) without moving the receive
frequency.
q
Push
∂
TX
.
• “
∂
TX
” appears.
w
Rotate [RIT/
∂
TX].
e
To reset the
∂
TX frequency, hold down
CLEAR
for 1 second.
• Push
CLEAR
momentarily to reset the
∂
TX frequency
when the quick RIT/
∂
TX clear function is ON. (p. 12-15)
r
To cancel the
∂
TX function, push
∂
TX
again.
• “
∂
TX
” disappears.
D
∂
TX monitor function
When the
∂
TX function is ON, holding down [XFC] al-
lows you to monitor the operating frequency directly.
✔
For your convenience— Calculate function
The frequency shift of the
∂
TX function can be
added/subtracted to the displayed frequency.
➥
While displaying the
∂
TX shift frequency, hold
down
∂
TX
for 1 second.
■
Monitor function
The monitor function allows you to monitor your trans-
mit IF signals in any mode. Use this to check voice
characteristics while adjusting SSB transmit parame-
ter (p. 12-5). The CW sidetone functions regardless of
the
MONITOR
switch setting.
q
Push
MONITOR
to switch the monitor function ON
and OFF.
• [MONITOR] indicator above this switch lights green.
w
Rotate [MONI GAIN] for the clearest audio output
while pushing [PTT] and speaking into the micro-
phone.
NOTE:
When using the VOX voice delay, turn the
monitor function OFF; or transmitted audio will be
echoed.
[RIT/
∂
TX]
∂
TX
CLEAR
XFC
[MONI GAIN]
MONITOR
6
FUNCTIONS FOR TRANSMIT