Icom IC-7700 Instruction Manual Download Page 200

Page: 200 / 232

13-8

■

About protection indications

The IC-7700 has a 2-step protection function to pro-
tect the final power amplifiers.

The protector monitors the power amplifier tempera-
ture and activates when the temperature becomes

extremely high.

• Power down transmission

Reduces the transmit output power to 100 W.
“LMT” appears beside the transmit indicator during

transmit.

• Transmission inhibit

Deactivates the transmitter.
The transmit indicator is displayed in gray during

transmit.

When the protector is activated, wait until the

power amplifier cools down using the transceiver in
stand-by or receive condition.

NOTE: DO NOT

turn the transceiver power OFF

when the protector is ON. If you do, the cooling fan
will not function and it will take longer to cool the
transceiver.

The power amplifier temperature can be monitored in
the multi-function meter, TEMP gauge.

■

Screen saver function

The IC-7700 has a screen saver function to protect
the LCD from the “burn-in” effect.

Push

EXIT/SET

several times to close a multi-func-

tion screen, if necessary.

Push [SET]

F-7

to select set mode menu screen.

Push [DISP]

F-3

to enter display set mode.

Push [

]

F-1

or [

]

F-2

several times to select

the “Screen Saver Function” item.

Rotate the main dial to select the desired time pe-

riod for the screen saver activation from 15, 30, 60
minutes and OFF.

• Deactivate the screen saver with “OFF” selection.

Push [

]

F-2

to select the “Screen Saver Type”

item.

Rotate the main dial to select the screen saver

type from “Bound,” “Rotation” and “Twist.”

• Hold down [PREVIEW]

F-5

to display the pattern for

your reference.

Push

EXIT/SET

twice to exit set mode.

Check the temperature

Main dial

F-2

F-3

F-1

DISP

F-5

PREVIEW

EXIT/SET

F-7

SET

∫

√

MAINTENANCE

Summary of Contents for IC-7700









































































































































































































































Search results

Summary of Contents for IC-7700

Reviews:

Related manuals for IC-7700

Brands by name

Popular brands

Icom IC-7700, Instruction Manual

Search results

Summary of Contents for IC-7700

Reviews:

Related manuals for IC-7700

Brands by name

Popular brands