![background image](http://html.mh-extra.com/html/icom/ic-7700/ic-7700_instruction-manual_612325129.webp)
7-11
7
VOICE RECORDER FUNCTIONS
■
Sending a recorded message
D
Single TX
F-1
T1
F-2
T2
F-3
T3
F-4
T4
F-7
T/R
EXIT/SET
q
Push
EXIT/SET
several times to close a multi-func-
tion screen, if necessary.
w
Select a phone mode by pushing
SSB
or
AM/FM
.
e
Push [VOICE]
F-2
to enter the Voice recorder
menu.
r
Push [PLAY]
F-1
to enter the Voice recorder
screen.
• If the receive voice message appears, push [T/R]
F-7
to select TX message (T1–T4).
t
Push a desired message switch, [T1]
F-1
to
[T4]
F-4
, to transmit the contents.
Appears
Counts down
• The transceiver transmits automatically.
• “
SEND
” indicator appears and the memory timer
counts down.
• You hear the transmitted message from the speaker as
the default. This can be turned OFF in voice set mode.
(p. 7-13)
y
Push the selected message switch, [T1]
F-1
to
[T4]
F-4
, again to stop, if desired.
• The transceiver returns to receive automatically when all
of the recorded contents in the message are transmit-
ted.
u
Push
EXIT/SET
twice to exit the voice memory
screen.
D
Repeat TX
F-1
T1
F-2
T2
F-3
T3
F-4
T4
F-7
T/R
EXIT/SET
q
Perform steps
q
to
r
above.
w
Hold down a desired message switch, [T1]
F-1
to
[T4]
F-4
, for 1 second to repeatedly transmit the
recorded voice audio for up to 10 minutes at the
interval specified in “Repeat Time.”
• Even if 10 minutes pass while transmitting, the voice
audio is completely transmitted.
• One of the following steps will cancel the transmission.
- Push the memory again.
- Push another memory (except for [TX LEV.]).
Appears
Repeat indicator
- Exit the TX Voice memory screen.
- Turn OFF the power, then turn it ON again.
- Activate the transmission.
The repeat transmission is cancelled. But while trans-
mitting, the voice audio is completely transmitted.
• Once the Repeat TX is made, the transceiver pauses
until the end of the “Repeat Time,” then transmits again.
After the second transmission, the Repeat TX continues
pausing, if receiving a signal. But if the squelch is manu-
ally opened, the voice audio is repeatedly transmitted,
according to the repeat time setting.
✔
For your convenience
When an external keypad or PC keyboard is connected, the recorded message, T1 to T4, can be transmitted
without opening the Voice Recorder screen. See pages 2-6, 2-7 and 12-17 for details.
• The recorded message, T1 to T4 is transmitted once when pushing one of four switches on the external keypad; the re
-
corded message is repeatedly transmitted when holding down a switch.
• The recorded message, T1 to T4 is transmitted once when pushing one of [F1] to [F4] key on the PC keyboard; the re
-
corded message is repeatedly transmitted when pushing a key while holding down [SHIFT] key.