![background image](http://html.mh-extra.com/html/icom/ic-7700/ic-7700_instruction-manual_612325137.webp)
8-3
8
MEMORY OPERATION
■
Memory channel programming
Memory channel programming can be preformed ei-
ther in VFO mode or in memory mode.
D
Programming in VFO mode
q
Set the desired frequency, operating mode and fil-
ter width in VFO mode.
w
Push
∫
/
√
several times to select the de-
sired memory channel.
• Memory list screen is convenient for selecting the de
-
sired channel.
• Memory channel contents appear in the memory chan
-
nel readout (below the frequency readout).
• “--.---.--” appears if the selected memory channel is a
blank channel (and does not have contents).
e
Hold down
MW
for 1 second to program the
displayed frequency, operating mode, etc., into the
memory channel.
D
Programming in memory mode
q
Select the desired memory channel with
∫
/
√
in memory mode.
• Memory channel contents appear in the memory chan
-
nel readout (below the frequency readout).
• “--.---.--” appears if the selected memory channel is a
blank channel (and does not have contents).
w
Set the desired frequency and operating mode in
memory mode.
• To program a blank channel, use direct frequency entry
with the keypad or memo pads, etc.
e
Hold down
MW
for 1 second to program the
displayed frequency and operating mode into the
memory channel.
MW
Y
Z
or
Hold down for 1 sec.
Beep
Beep
Beep
MW
SSB
[EXAMPLE]:
Programming 7.088 MHz/LSB into memory channel 12.
or
then
Hold down for 1 sec.
Beep
Beep
Beep
7
21
MW
SSB
[EXAMPLE]:
Programming 21.280 MHz/USB into memory channel 18.