![background image](http://html.mh-extra.com/html/icom/ic-7700/ic-7700_instruction-manual_612325019.webp)
1-9
$7
MEMO PAD-WRITE SWITCH
MP-W
(p. 8-7)
Programs the displayed readout frequency and op-
erating mode into a memo pad.
• The 5 most recent entries remain in memo pads.
• The memo pad capacity can be expanded from 5 to 10
in set mode. (p. 12-15)
$8
MEMO PAD-READ SWITCH
MP-R
(p. 8-7)
Each push calls up a frequency and operating
mode in a memo pad. The 5 (or 10) most recently
programmed frequencies and operating modes
can be recalled, starting from the most recent.
• The memo pad capacity can be expanded from 5 to 10
in set mode. (p. 12-15)
$9
VFO/MEMORY SWITCH
V/M
➥
Switches the selected readout operating mode
between the VFO and memory when pushed.
(pp. 3-3, 8-2)
➥
Transfers the memory contents to VFO when
held down for 1 second. (p. 8-4)
%0
VFO EQUALIZING SWITCH
A=B
(p. 3-3)
Transfers the displayed VFO frequency (VFO-A or
VFO-B) to the undisplayed VFO frequency (VFO-B
or VFO-A) when held down for 1 second.
%1
FILTER SWITCH
FILTER
(p. 5-14)
➥
Selects one of 3 IF filter settings.
➥
Enters the filter set screen when held down for
1 second.
%2
AUDIO PEAK FILTER/TWIN PEAK FILTER
SWITCH
APF/TPF
During CW mode operation
(p. 4-6)
➥
Push to turn the audio peak filter ON or OFF.
• “
APF
” appears when audio peak filter is in use.
➥
Hold down for 1 second to select the APF pass-
band width from WIDE, MID and NAR or from
320, 160 and 80 Hz depending on APF type
setting.
During RTTY mode operation
(p. 4-14)
➥
Push to turn the twin peak filter ON or OFF.
• “
TPF
” appears when twin peak filter is in use.
%3
MINI SPECTRUM SCOPE SWITCH
M.SCOPE
(p. 5-4)
➥
Push to turn the mini spectrum scope screen
ON or OFF.
• The mini spectrum scope screen can be displayed
with another screen, such as memory or set mode
screen, simultaneously.
➥
Hold down for 1 second to turn ON the spec-
trum scope screen.
%4
VOICE MEMORY RECORD SWITCH
REC
➥
Push to record the previous received signal for
the preset time period. (p. 7-7)
• The preset time period can be set in voice set mode.
(p. 7-13)
➥
Hold down for 1 second to record a QSO (Com-
munication) audio onto a memory device. (p. 7-2)
• Hold down this switch for 1 second to stop record
-
ing.
%5
VOICE MEMORY PLAYBACK SWITCH
PLAY
(p. 7-4)
➥
Plays back the previously recorded audio for the
preset time period when pushed.
➥
Plays back all of the previously recorded audio
when held down for 1 second.
%6
EXIT/SET SWITCH
EXIT/SET
➥
Push to exit, or return to the previous screen
display during spectrum scope, memory, scan
or set mode screen display.
➥
Displays set mode menu screen when held
down for 1 second.
%7
MAIN DIAL
Changes the displayed frequency, selects set
mode setting, etc.
%8
LOCK SWITCH [LOCK]
(p. 5-18)
Push to switch the dial lock function ON or OFF.
%9
SPEECH SWITCH
SPEECH
(p. 3-11)
➥
Push to announce the S-meter indication and
the selected frequency.
➥
The selected operating mode is additionally an-
nounced when held down for 1 second.
^0
SPLIT SWITCH
SPLIT
(p. 6-6)
➥
Turns the split function ON or OFF when
pushed.
➥
Turns the split function ON. When held down for
1 second in non-FM modes, transfers the unse-
lected VFO’s readout frequency to the selected
VFO’s readout and sets the unselected VFO to
transmit VFO.
(Quick split function)
• The offset frequency is shifted from the selected
VFO frequency in FM mode. (p. 12-13)
• The quick split function can be turned OFF using set
mode. (p. 12-13)
➥
Turns the split function ON and shifts the unse-
lected VFO frequency after inputting an offset.
1
PANEL DESCRIPTION