![background image](http://html.mh-extra.com/html/icom/ic-7700/ic-7700_instruction-manual_612325153.webp)
10-3
■
Antenna memory settings
This function stores the antenna connector number
for each frequency band.
q
Push
EXIT/SET
several times to close multi-function
screen, if necessary.
w
Hold down [ANT]
(MF1)
for 1 second to select an-
tenna set screen.
e
Select the desired frequency band with a band key.
r
Push [ANT]
(MF1)
several times to select the de-
sired antenna number that you want to set for the
selected frequency band.
• “
★
” appears.
t
Hold down [ANT MW]
F-3
for 1 second to store
the antenna selection into the antenna memory.
• “
★
” disappears.
y
Repeat the steps
e
to
t
to store the antenna se-
lection for another frequency bands, if desired.
u
Push
EXIT/SET
to exit antenna set screen.
D
Antenna type selection
When no antenna is connected to [ANT2], [ANT3],
and/or [ANT4], these antenna connectors can be de-
activated — deleting the antenna number from the
available selections. This prevents the transceiver
from accidentally transmitting into an unused antenna
connector. In addition, a receive-only antenna can be
specified for [ANT4].
q
Select the antenna set screen as described above.
w
Push [ANT TYPE]
F-7
to select antenna type set
screen.
e
Push [
Y
]
F-1
or [
Z
]
F-2
to select the desired
antenna.
r
Rotate the main dial to select the desired antenna
condition from TX/RX, RX (ANT4 only) and OFF.
• TX/RX : Select when an antenna is connected.
• OFF
: Select when no antenna is connected.
• RX
: Select when a receive only antenna is
connected.
(available for the [ANT4] only)
t
Push
EXIT/SET
to exit antenna type set screen.
✔
For your information
The “OFF” antennas cannot be selected with [ANT]
(MF1)
switch operation, or with the antenna memory
setting.
When “RX” is selected for [ANT4], “1/R,” “2/R” and
“3/R” selections will be added for the selection for
both [ANT]
(MF1)
switch operation and the antenna
memory setting. In these selections, the antenna con-
nected to [ANT1], [ANT2] and/or [ANT3] will be used
for transmission and the antenna connected to [ANT4]
will be used for reception.
Band keys
ANT
F-3
ANT MW
F-1
∫
F-2
√
F-7
ANT TYPE
10
ANTENNA TUNER OPERATION