![background image](http://html2.mh-extra.com/html/labsat/3-wideband/3-wideband_quick-start-manual_3201173001.webp)
Record
1.
Connect the antenna to the ‘RF IN’ port on the
rear of the
LabSat 3
Wideband
.
www.labsat.co.uk
Quick Start Guide
2.
Place the antenna in the middle of the car roof.
3.
Ensure you have selected the correct
record
settings
(i.e. quantisation, bandwidth,
frequency).
4.
Press the ‘REC’ button to start recording.
5.
Drive the desired route.
TIP:
Record at least 4 minutes of stationary data to allow for
acquisition later.
6.
Press the ‘REC’ button again to stop recording.