![background image](http://html.mh-extra.com/html/icom/ic-207h/ic-207h_instruction-manual_611992044.webp)
9
SCAN OPERATION
39
■
Scan start/stop
D
Pre-operation
• Common setting:
scan resume condition. (p. 43)
• For programmed scan: program the scan edges. (p. 40)
• For memory scan:
program 2 or more memory chan-
nels; set memory skip settings, if de-
sired. (p. 42)
D
Operation
➀
Push [BAND] to select a band, if necessary.
➁
Select VFO mode for full/programmed scan with the
[V/MHz] switch; or memory mode for memory scan with the
[M/CALL] switch.
➂
Set the squelch to the point where noise is muted.
➃
Push
for 1 sec. to start the scan.
• When the tone squelch is in use,
starts a normal scan—
not tone scan.
• To change the scanning direction, rotate the tuning dial.
• The memory channel readout indicates the scan type as follows:
SCAN
SCAN
➄
To select the scan range while operating full/programmed
scan, push [BAND] several times.
➅
To stop the scan, push [VMHz].
Ä
Push [BAND] to select the desired band, if nec-
essary.
Å
Push [VFO] to select VFO mode for full/pro-
grammed scan; or push [MR] to select memory
mode for memory scan.
Ç
Push [
HY
SQL] or [
AZ
SQL] one or more times
to set the squelch just closed.
É
Push [
➂
SCAN] to start the scan.
• [
Y
]/[
Z
] also start the scan when pushed and held.
Ñ
To select the scan range while operating
full/programmed scan, push [BAND] several
times.
Ö
To stop the scan push [
E
CLR].
During full scan
Push
to select full scans
and scan edge
pairs in sequence.
BAND
H I
1
9
5
During programmed scan
Indicates scan edge channels.
• P1 stands for 1A/1b.
• P1 to P5 are available when
they are programmed.
H I
1
9
5
During memory scan
H I
M
1
9
5
SCAN
2
BAND