![background image](http://html.mh-extra.com/html/icom/ic-207h/ic-207h_instruction-manual_611992036.webp)
6
MEMORY OPERATION
31
■
Programming a memory channel via the microphone
Memory channel programming can be performed
via the microphone.
Ä
Push [BAND] to select the desired band, if necessary.
Å
Set the desired frequency in VFO mode:
➥
Push [VFO] to select VFO mode.
➥
Set the frequency using the keypad.
➥
Set other data (e.g. offset frequency, duplex direction, subaudi-
ble tone encoder ON/OFF and its frequency), if required.
Ç
Push [FUNC] then [
E
MW] momentarily.
É
Select the memory channel to be programmed:
➥
Push [
Y
] or [
Z
] to select the memory channel (direct numeral
input cannot be used).
Ñ
Push [FUNC] then [
E
MW] for 1 sec. to program.
➥
3 beeps may sound and the VFO contents (including the sub-
audible tone frequency, etc.) are programmed.
➥
Memory channel number advances when continuing to push
[MW] after programming.
[EXAMPLE]:
Programming 145.870 MHz into memory channel 20 via the microphone.
Push
,
Push
then
momentarily
Push
Push
for 1 sec. and
continue pushing
BAND
VFO
8
DUP+
7
DUP
5
MID
1
MONI
4
HIGH
C
ENT
MW
FUNC
A
CLR
then
MW
FUNC
A
CLR
M
H I
1
9
5
H I
1
9
5
H I
1
9
5
H I
1
9
5
H I
1
9
5
M
H I
1
9
5
MW