![background image](http://html.mh-extra.com/html/icom/ic-207h/ic-207h_instruction-manual_611992020.webp)
SETTING A FREQUENCY
3
15
■
Preparation
D
Turning power ON/OFF
Push [PWR] for 1 sec. to turn power ON or OFF.
D
Operating band
The IC-207H can receive/transmit on the 144 MHz and
430(440) MHz bands, or receive only on the avionics band
(USA version only).
Push [BAND] one or more times to select the desired operat-
ing band.
• The frequency changes to indicate the selected band.
• The operating band cannot be changed unless you are in VFO
mode (see right).
Push [BAND] one or more times to select the de-
sired operating band.
D
VFO and memory modes
The transceiver has 2 normal operating modes: VFO mode
and memory mode.
Push [V/MHz] to select VFO mode when the transceiver is
not in VFO mode.
• If VFO mode is already selected, the digits below 100 kHz disap-
pear. In this case, push [V/MHz] again (or push twice depending on
version).
Push [VFO] to select VFO mode.
Push [PWR] for 1 sec.
BAND
Appears when memory mode
is selected.
VFO mode is selected.
H I
1
9
5
H I
1
9
5
d
VFO