3
SETTING A FREQUENCY
17
■
Using the tuning dial
➀
Push [BAND] to select the desired band, if necessary.
➁
Rotate the tuning dial to set the frequency.
• If VFO mode is not selected, push the [V/MHz] to select VFO
mode.
• Frequency changes according to the selected tuning steps.
(p. 18)
➂
For the 1 MHz frequency setting, rotate the tuning dial after
pushing [V/MHz].
• Pushing [V/MHz] for 1 sec. starts a scan function. If this happens,
push [V/MHz] again to stop the scan.
■
Using [
Y
]/[
Z
] switches
Push [
Y
] or [
Z
] to set the selected band’s fre-
quency.
• If VFO mode is not selected, push [VFO] to select it.
• Frequency changes according to the selected tuning
steps. (p. 18)
• Pushing [
Y
] or [
Z
] for more than 0.5 sec. activates a
scan. If this happens, push [
Y
] or [
Z
] again to stop it.
NOTE:
1 MHz steps cannot be used via the [
Y
]/[
Z
]
switches.
The display shows that the 1 MHz
tuning step is selected for the
VHF band.
H I
1
9
5
YZ
