![background image](http://html.mh-extra.com/html/icom/ic-207h/ic-207h_instruction-manual_611992047.webp)
9
SCAN OPERATION
42
■
Skip channel setting
The memory skip function speeds up scanning by checking
only desired memory channels. Set the memory channels to
be skipped or scanned as follows.
➀
Push [BAND] to select the a band, if necessary.
➁
Select the memory channel to program or to cancel the
skip function on:
➥
Select memory mode by pushing [M/CALL] once or twice.
➥
Rotate the tuning dial to select the memory channel.
➂
Push [SET] one or more times until “CHS” appears as
shown above.
• Pushing [MONI] reverses the order of selection.
➃
Rotate the tuning dial to turn the skip function ON or OFF
on the selected channel.
• “
~
” appears
: The memory channel is skipped during
(CHS-on)
memory scan.
• “
~
” disappears
: The memory channel is scanned during
(CHS-OFF)
memory scan.
➄
Push [V/MHz] to exit set mode.
NOTE:
Scan edge memory channels cannot be specified
as skip channels, however, they are skipped during mem-
ory scan anyway.
USING
SET MODE
The display shows that
memory channel 10 is set as
a skip channel.
H I
M
1
9
5
SKIP
Ä
Push [BAND] to select the desired band, if nec-
essary.
Å
Select the memory channel to program or to
cancel the skip function on:
➥
Select memory mode by pushing [MR].
➥
Push [
Y
] or [
Z
] to select a memory channel.
Ç
Push [
F
SET] one or more times until “CHS” ap-
pears as shown at left.
• Pushing [
G
ENT] reverses the order of selection
once entering set mode.
É
Push [
Y
] or [
Z
] to set or cancel the skip infor-
mation.
• See item
➃
at left for skip indicator details.
Ñ
Push [
E
CLR] to exit set mode.
SET
B