![background image](http://html.mh-extra.com/html/icom/ic-207h/ic-207h_instruction-manual_611992054.webp)
11
DTMF MEMORY ENCODER
49
■
DTMF speed
The rate at which DTMF memories send individual DTMF
characters can be set to accommodate operating needs.
➀
Push [PWR] to turn power OFF.
➁
While pushing [SET] (far right switch), push [PWR] for 1
sec. to turn power ON and enter initial set mode.
➂
Push [SET] or [MONI] to select the “dtd” display as shown
above.
➃
Rotate the tuning dial to select the desired speed as shown
in the table below.
➄
Push [PWR] momentarily to exit initial set mode.
USING
INITIAL SET MODE
The display shows the fastest
DTMF speed is selected.
DISPLAY
INTERVAL
SPEED
dtd-1
100 msec.
5.0 cps
dtd-2
200 msec.
2.5 cps
dtd-3
300 msec.
1.6 cps
dtd-5
500 msec.
1.0 cps
cps=
characters/second