![background image](http://html.mh-extra.com/html/icom/ic-207h/ic-207h_instruction-manual_611992034.webp)
MEMORY OPERATION
6
29
■
General description
The transceiver has 150 regular memory channels, 10 scan
edge memory channels (5 pairs) plus 2 call channels (by de-
fault C1 is for VHF and C2 is for UHF, however both can be
set to VHF or both to UHF as desired); each of these can be
individually programmed with the following data.
• Operating frequency (pgs. 15–19)
• Duplex direction (DUP or DUP–) and its offset frequency
(pgs. 24, 25, 27)
• Subaudible tone encoder or tone squelch and its tone fre-
quency (pgs. 24–26)
• Skip information* (p. 42)
*Except for the scan edge memory channels.
■
Memory channel selection
D
Using the tuning dial
➀
Push [M/CALL] once or twice to display “
!
”.
➁
Rotate the tuning dial to select the desired memory chan-
nel.
• Only programmed memory channels can be selected.
D
Using [
Y
]/[
Z
] switches
Ä
Push [BAND] to select the desired band, if nec-
essary.
Å
Push [MR] to select memory mode.
Ç
Push [
Y
] or [
Z
] several times to select the de-
sired memory channel.
• Pushing [
Y
]/[
Z
] more than 0.5 sec. activates a scan.
• If a scan is activated, push [
Y
] or [
Z
] again to stop it.
D
Using the keypad
Ä
Push [BAND] to select the desired band, if nec-
essary.
Å
Push [MR] to select memory mode.
Ç
Push [
G
ENT] to activate the keypad for nu-
meral input.
É
Push 2 appropriate digit keys to input a chan-
nel number.
• When inputting non-programmed channel numbers
the previous memory channel appears.
• To select scan edge channels, “
B
” and “
A
” can be
used for A and b respectively.
MR
YZ
MR
ENT
C