![background image](http://html.mh-extra.com/html/icom/ic-207h/ic-207h_instruction-manual_611992037.webp)
6
MEMORY OPERATION
32
■
Transferring memory
contents
This function transfers a memory channel’s contents into a
VFO (or another memory/call channel). This is useful when
searching for signals around a memory channel frequency
and for recalling the offset frequency, subaudible tone fre-
quency, etc.
➀
Push [BAND] one or more times to select a band.
➁
Select the memory channel to be transferred:
➥
Select memory mode by pushing [M/CALL] once or twice (“
!
”
appears).
➥
Rotate the tuning dial to select the memory channel.
➂
Push [S.MW] momentarily, then rotate the tuning dial to se-
lect another memory channel to transfer.
• To transfer to the VFO, push and hold [
(S.MW)
MW] instead of
pushing momentarily.
➃
Push and hold [
(S.MW)
MW] to transfer when a momentary
push was used in the previous step.
Push
+
for 1 sec.
MW
FUNC
A
CLR
MW
S.MW
T
DUP
H I
M
1
9
5
T
DUP
H I
1
9
5
Ä
Push [BAND] to select the desired band, if nec-
essary.
Å
Select the memory channel to be transferred:
➥
Push [MR] to select memory mode.
➥
Push [
Y
] or [
Z
] to select the memory channel; or
push [
G
ENT] then push the desired memory chan-
nel number (2 digits) to select the memory chan-
nel directly.
Ç
Push [FUNC] then [
E
MW] momentarily, then
push [
Y
] or [
Z
] to select another memory
channel to transfer.
• To transfer to the VFO, push [FUNC] then push and
hold [
E
MW] instead of pushing momentarily.
É
Push [FUNC] then [
E
MW] for 1 sec. to transfer
when a momentary push was used in the previ-
ous step.
MW