![background image](http://html.mh-extra.com/html/icom/ic-207h/ic-207h_instruction-manual_611992035.webp)
6
MEMORY OPERATION
30
■
Programming a memory channel
VFO mode settings, including the set mode contents such as
subaudible tone frequency, etc., can be programmed into a
memory channel.
➀
Set the desired frequency in VFO mode:
➥
Push [V/MHz] to select VFO mode.
➥
Set the frequency using the tuning dial.
➥
Set other data (e.g. tone frequency, etc.) if required.
➁
Push [S.MW] momentarily.
• “
!
” and the memory channel number flash.
➂
Rotate the tuning dial to select the memory channel to be
programmed.
• Memory channels not yet programmed are blank.
➃
Push [S.MW] for 1 sec. to program.
• 3 beeps may sound.
• Memory channel number automatically advances when continu-
ing to push [S.MW] after programming.
✔
CONVENIENT
Memory programming can be performed in versatile ways
e.g. memory channel to the same (or different) memory chan-
nel, memory channel to the call channel, etc.
[EXAMPLE]:
Programming 145.870 MHz into memory channel 20 via the remote controller.
Push
and
Rotate
for setting
freq., etc.
Rotate
Push
momentarily
Push
for 1 sec. and continue pushing
M
H I
1
9
5
H I
1
9
5
H I
1
9
5
H I
1
9
5
H I
1
9
5
BAND
MW
S.MW
MW
S.MW
M
H I
1
9
5
VFO