![background image](http://html.mh-extra.com/html/icom/ic-207h/ic-207h_instruction-manual_611992029.webp)
REPEATER OPERATION
5
24
■
Accessing a repeater
➀
Push [BAND] one or more times to select the desired band.
➁
Set the receive frequency (repeater output frequency).
(pgs. 15–19)
➂
Push and hold
for 1 sec., one or more times, to se-
lect – duplex or + duplex.
• “DUP –” or “DUP” appears to indicate the transmit frequency for
minus shift or plus shift, respectively.
• When the auto repeater function is turned ON, (available for the
U.S.A. version only), steps
➁
,
➂
are not necessary. (p. 31)
➃
Push [TONE] one or more times to turn ON the subaudible
tone encoder, according to repeater requirements.
• Refer to p. 26 for tone frequency settings.
• When the repeater requires a different tone system, see the page
at right.
➄
Push and hold [PTT] to transmit.
• The displayed frequency automatically changes to the transmit
frequency (repeater input frequency).
• The operating condition is automatically programmed into a
scratch pad memory. See p. 36 for details.
DUP
• If “oFF” appears, confirm the offset frequency. (p. 27)
➅
Release [PTT] to receive.
➆
Push [MONI] to check whether the other station’s transmit
signal can be directly received or not.
➇
To return to simplex, push
for 1 sec., once or twice,
to clear the “DUP” indicator.
➈
To turn OFF the subaudible tone encoder, push [TONE]
one or more times until no tone indicators appear.
DUP
DUP
H I
1
9
5
T
DUP
H I
1
9
5
T