1
Rev 7/15
External Wireless Module
For
HD / Skylink® Receiver
Programming the remote (LCD wall control with menu):
1.
On the wall control, press MENU.
2.
Highlight PROGRAM and select it.
3.
Highlight REMOTE and select it.
4.
Insert the program jumper into the remote connector.
5.
Once the remote transmitter has been learned by the opener, you
will hear a series of clicks from the motor unit and the lights in the
opener (if installed) will flash indicating successful learning of the
remote. You can now unplug the program jumper.
6.
Press the select button on the wall control to save the setting and
exit out to the main screen.
7.
Plug the remote connector into the back of the HD receiver and
test using your bike’s high beam switch or other transmitter
paired to the HD receiver.
If your wall control doesn’t have an LCD menu or the steps above don’t
work, then proceed to the next page.
