![background image](http://html.mh-extra.com/html/icg/360/360_user-manual_610616053.webp)
Installing the Scanner Program
8. Remove the disk from the scanner floppy
disk drive then press the RESET button to
load the old scanner program.
9. Close the PC Monitor window on the
Macintosh.
10. Restart Scan
Xact
to update it with the
scanner program information.
Your
360
scanner is now ready to use with the old
program.
Installing a Different
Size Quick
Mount
Drum
If you decide to upgrade your
360
scanner with the
large, 232 mm (9.1 inch) height Quick
Mount
drum,
the scanner system must be told about the new
drum. If you do not do this the scanner will not
scan the full height of the drum.
To install the new drum:
1. Power on the
360
scanner and Macintosh
then load your Scan
Xact
program.
2. Choose PC Monitor from the View menu.
3. Press Return on the Macintosh then check
that the
360
Top Level Menu is displayed.
If not, there is a problem with your PC serial
connection. Do not continue with the
installation until it is solved.
4. Open the lower door of the scanner then
insert the disk labelled ‘PC Program Disk 1
Scanner Software’ into the scanner floppy
disk drive.
5. Press the RESET button on the front of the
scanner computer unit.
3250360-2
33
Summary of Contents for 360
