![background image](http://html.mh-extra.com/html/icg/360/360_user-manual_610616052.webp)
360
Drum Scanner User Manual
2. Choose PC Monitor from the View menu.
3. Press Return on the Macintosh and check
that the
360
Top Level Menu is displayed.
If not, there is a problem with your PC serial
connection. Do not continue until it is solved.
4. Open the lower door of the scanner and
insert the disk labelled ‘PC Program Disk 1
Scanner Software’ into the scanner floppy
disk drive.
5. Press the RESET button on the front of the
scanner computer unit.
The scanner installer program now loads. After
about 45 seconds the usual
360
Installation menu
appears in the PC Monitor window (see above).
6. Type P to return to the previous scanner
program.
Before restoring the previous program, you are
given the following confirmation prompt:
You chose to return to the
previous Scanner program. Is this
correct [Y,N]?
7. Type Y to confirm the operation.
The installer now swaps the current scanner
program and the backed up previous version.
Progress messages are shown in the PC Monitor
window. After a while the following prompt is
given:
Previous version restored
Remove disk and press reset to
restart scanner.
32
3250360-2
Summary of Contents for 360
