![background image](http://html.mh-extra.com/html/icg/360/360_user-manual_610616032.webp)
360
Drum Scanner User Manual
To fit the drum to the scanner:
1. Hold the drum upright with the drum release
button facing towards you then position the
drum on the hub so that cut-outs on the
inside of the boss fit over the lugs on the
hub.
2. When the drum is resting correctly on the
hub, grasp the boss firmly with both hands
and turn it to the left (clockwise when
viewed from above) through 20° until it
meets a positive stop:
Note: If you find that the drum becomes difficult
to turn, please refer to Lubricating the
Drum Retaining Claws in the Servicing
chapter, later in this book.
3. Release the drum and confirm that the drum
release button pops out.
Note: Any originals mounted on the drum should
appear inverted.
4. Close the drum access door.
12
3250360-2
Summary of Contents for 360
