![background image](http://html.mh-extra.com/html/icg/360/360_user-manual_610616051.webp)
Installing the Scanner Program
12. Insert the disk labelled ‘PC Program Disk 2
Scanner Utilities’ into the scanner floppy
disk drive.
13. Press the RESET button on the front of
the scanner computer unit.
The remaining program files are now installed.
Once again progress messages are shown in
the PC Monitor window. On completion the
following prompt is shown:
Installation complete. Remove
disk and press reset to restart
scanner.
14. Remove PC Program Disk 2 then press the
RESET button again to load the new
scanner program.
15. Close the PC Monitor window on the
Macintosh.
16. Restart Scan
Xact
to update it with the
new scanner program information.
Your
360
scanner is now ready to use.
Restoring the
Previous Program
Version
This procedure is used to restore the previous
version of the scanner program as the working
program. If you later wish to return to the new
program, simply repeat the procedure – each time
you do this the installer swaps between the two
most recent program versions.
Caution: The previous version of the scanner
program may not be compatible with the
current Macintosh Scan
Xact
program.
1. Power on the
360
scanner and Macintosh
then launch your current Scan
Xact
program.
3250360-2
31
Summary of Contents for 360
