![background image](http://html.mh-extra.com/html/icg/360/360_user-manual_610616026.webp)
360
Drum Scanner User Manual
Chapter 2 Using the
360
Scanner
Switching on the
Scanner
The scanner must be powered on
before
the
Scan
Xact
operating program can be loaded on the
Macintosh. The Power On/Off switch is at the left-
hand side of the scanner:
Power
On/Off
Switch
When the
360
is connected to some PCI bus
Macintosh workstations it may not power-up
correctly unless the Macintosh is powered-up first.
The recommended power-up sequence is therefore:
1. Start the Macintosh then wait for its
Operating System to load.
2. Ensure that the drum access door is closed
then power-up the scanner.
If the door is open the scanner cannot complete
its door lock test routine.
Following power-up, the
360
automatically loads its
operating program and carries out a series of self-
tests.
6
3250360-2
Summary of Contents for 360
