![background image](http://html.mh-extra.com/html/icg/360/360_user-manual_610616056.webp)
360
Drum Scanner User Manual
Installing or
Removing
Background
Scanning Option
If you upgrade your
360
scanner system to
background scanning the scanner software should
be upgraded to activate the faster scanning
capability of this option. The scanner can also be
returned to foreground scanning operation using this
procedure.
To install or remove the background scanning option:
1. Power on the
360
scanner and Macintosh
then load your Scan
Xact
program.
2. Choose PC Monitor from the View menu.
3. Press Return on the Macintosh then check
that the
360
Top Level Menu is displayed.
If not, there is a problem with your PC serial
connection. Do not continue with the
installation until it is solved.
4. Open the lower door of the scanner then
insert the disk labelled ‘PC Program Disk 1
Scanner Software’ into the scanner floppy
disk drive.
5. Press the RESET button on the front of the
scanner computer unit.
The scanner installer program now loads. After
about 45 seconds the
360
Installation menu
appears in the PC Monitor window:
36
3250360-2
Summary of Contents for 360
