background image

Trademarks

Scan

Xact

™, Quick

Mount

™, Monitor

Match

™ and Send

Direct

™ are

trademarks of ICG Ltd.

Additionally, ICG Ltd acknowledges the following trademarks:

Apple® is a registered trademark of Apple Computer, Inc.
DCS (Desktop Colour Separation) is a trademark of Quark, Inc.
Macintosh® and Power Macintosh® are trademarks of Apple
Computer, Inc.
Photoshop® is a registered trademark of Adobe Systems, Inc.
Interchange Pro is a trademark of Highwater Designs Ltd.

FCC Regulations

NOTE: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.

Canadian Radio Interference Regulations

This digital apparatus does not exceed the Class A limits for radio
noise emissions from digital apparatus set out in the Radio
Interference Regulations of the Canadian Department of
Communications.
                                                                                                                                          

Le présent appareil numérique n’émet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques du class A
prescrites dans le Réglement sur le brouillage radioélectrique édicté
par le ministère des Communications du Canada.

Manual reproduced by Westward Digital Limited, Cheltenham using
Rank Xerox DocuTech Digital Printing. Covers printed by Quorum
Technical Services Limited, Cheltenham.

Summary of Contents for 360








































































































Reviews: